Chicco Next Fit Max User Guide
![Chicco Next Fit Max Car Seat manual cover](/images/AHOzERosSlFlnTCQYqIwAHxH/thumbs/thumb175x175.webp)
To install the Chicco NextFit Max using the LATCH system, recline the car seat base, attach the LATCH connectors to your vehicle's lower anchors, tighten the LATCH strap, and check for tightness. Ensure the seat does not move more than an inch side-to-side or front-to-back.
To adjust the harness height, squeeze the headrest adjustment handle located at the top of the car seat and slide it up or down until the harness is at or just above the child's shoulders.
If the harness straps are twisted, remove the child from the seat, unbuckle the harness, and gently untwist the straps. Ensure the straps lay flat against the child's body when buckled.
To clean the car seat cover, remove it according to the manual instructions. Machine wash it on a gentle cycle with cold water and mild detergent. Air dry the cover to prevent shrinkage.
Store the car seat in a cool, dry place. Ensure it is covered or placed in a storage bag to protect from dust and sunlight, and do not store it with heavy objects on top.
Make sure the harness is snug with no slack, and the chest clip is at armpit level. The harness should be threaded through the slots at or above the child's shoulders for forward-facing and at or below for rear-facing.
Regularly check the tightness of the installation, inspect the harness and buckles for wear, and ensure no parts are damaged or missing. Clean the seat as needed to maintain its condition.
Yes, the Chicco NextFit Max is FAA approved for use on aircraft. Ensure you have the car seat installation manual handy and install it using the airplane seat belt.
The Chicco NextFit Max accommodates children from 4 to 65 pounds, with a height range of 19 to 49 inches. Always check the label on the seat for the most current information.
To switch from rear-facing to forward-facing, adjust the recline to a suitable forward-facing position, remove the top tether from its storage and secure it to the vehicle tether anchor, and ensure the harness is appropriately adjusted for forward-facing use.