Chicco Key Fit User Guide

To install the Chicco Key Fit Car Seat, place the base in the back seat of your car. Use the LATCH system or seat belt to secure the base, ensuring it's level using the built-in level indicators. Finally, attach the car seat to the base until it clicks into place.
The Chicco Key Fit Car Seat is designed to accommodate infants from 4 to 30 pounds and up to 30 inches in height.
To clean the Chicco Key Fit Car Seat, remove the fabric cover and machine wash it in cold water with a mild detergent. Allow it to air dry. Clean the plastic parts with a damp cloth and mild soap.
Yes, the Chicco Key Fit Car Seat can be installed without the base using the vehicle's seat belt. Consult the user manual for instructions on how to properly secure the seat without the base.
To adjust the harness, first loosen the straps by pressing the harness release button. Reposition the straps at the appropriate height slots for your child, ensuring they are at or below shoulder level. Tighten the harness by pulling the adjustment strap.
If the base is moving more than an inch side-to-side or front-to-back, reinstall it, ensuring the LATCH or seat belt is properly tightened. Use a rolled towel or pool noodle under the base if necessary to achieve a snug fit.
Yes, the Chicco Key Fit Car Seat is FAA-approved for use on airplanes. Install it using the airplane seat belt, following the same steps as a vehicle installation without the base.
Check the manufacturer's label on the bottom of the seat for the expiration date. Typically, Chicco car seats expire 6 years from the date of manufacture.
If the fabric starts to fray, contact Chicco customer service for guidance. It may be necessary to replace the cover to ensure the seat's safety and integrity.
Yes, the Chicco Key Fit Car Seat is compatible with Chicco strollers and many other brands using an adapter. Ensure the car seat clicks securely into the stroller before use.