Chevrolet Trax 2022 Getting To Know Your Manual
![Chevrolet Trax 2022 manual cover](/images/fhqJwHhdDRNFNmdXqHRKWrYX/thumbs/thumb175x175.webp)
To connect your smartphone to the Chevrolet Trax 2022's infotainment system, enable Bluetooth on your phone, navigate to the Bluetooth settings on the infotainment screen, and select your device from the list. Follow any additional prompts to complete the pairing process.
If the engine won't start, first check the battery for charge and connections. Ensure the transmission is in 'Park' or 'Neutral', and confirm the key fob has a functioning battery. If the problem persists, consult a Chevrolet dealer for further diagnosis.
The oil in your Chevrolet Trax 2022 should be changed every 7,500 miles or 12 months, whichever comes first. Refer to the owner’s manual for specific guidelines based on driving habits and conditions.
To reset the TPMS, inflate all tires to the recommended pressure. Turn the ignition to the 'On' position without starting the engine, then press and hold the TPMS reset button until the tire pressure warning light blinks three times. Drive the vehicle for a few minutes to complete the reset process.
The Chevrolet Trax 2022 is designed to run on regular unleaded gasoline with an octane rating of 87 or higher. Avoid using fuels with a high ethanol content, such as E85.
To update the navigation system, visit the Chevrolet website to check for available updates. Download the update to a USB drive, then insert it into the vehicle’s USB port and follow the on-screen instructions to complete the installation.
To check the transmission fluid level, warm up the vehicle and ensure it is on a level surface. Locate the transmission dipstick, remove it, and wipe it clean. Reinsert the dipstick fully, then remove it again to check the fluid level, which should be between the 'Full' and 'Add' marks.
The recommended tire pressure for the Chevrolet Trax 2022 is typically 35 psi for both front and rear tires. Check the sticker inside the driver’s door frame for exact specifications.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector, remove the old bulb by twisting it counterclockwise, and insert the new bulb by twisting it clockwise. Reconnect the electrical connector.
If the "Check Engine" light comes on, ensure the gas cap is tightly secured, as this can trigger the light. If the light remains on, use an OBD-II scanner to check for error codes or visit a Chevrolet dealer for a diagnostic check.