Chevrolet Blazer 2019 Getting To Know Your Manual
![Chevrolet Blazer 2019 manual cover](/images/bwmygTOHzwHxHcEqfsQyIZfj/thumbs/thumb175x175.webp)
The recommended oil type for the 2019 Chevrolet Blazer is SAE 5W-30 full synthetic motor oil.
To reset the TPMS, turn the ignition to the ON position without starting the engine, then press and hold the TPMS reset button until the tire pressure light blinks three times.
The towing capacity of the 2019 Chevrolet Blazer is up to 4,500 pounds when properly equipped with the V6 engine and the Trailering Package.
It is recommended to replace the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check the owner's manual for specific recommendations.
If the check engine light illuminates, check for any noticeable issues such as unusual noises or performance changes. Schedule a diagnostic check with a qualified mechanic to identify and resolve the issue.
To pair your smartphone, enable Bluetooth on your device, navigate to the 'Phone' menu on the infotainment screen, select 'Pair Device', and follow the prompts to complete the pairing process.
To jump-start the Blazer, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the booster battery. Connect the negative cable to the negative terminal of the booster battery, and the other end to an unpainted metal surface on the Blazer. Start the booster vehicle, then the Blazer.
To replace a headlight bulb, open the hood and locate the headlight assembly. Remove the cover, disconnect the wiring harness from the bulb, and remove the old bulb. Insert the new bulb, reconnect the wiring harness, and replace the cover.
The recommended tire pressure for the 2019 Chevrolet Blazer is typically 35 psi for both front and rear tires. Refer to the tire placard on the driver’s door frame for exact specifications.
To update the navigation system, visit the Chevrolet owner center online, download the updates to a USB drive, and then insert the USB into the vehicle’s USB port. Follow the on-screen instructions to complete the update.