Chevrolet Trax 2018 Getting To Know Your Manual
![Chevrolet Trax 2018 manual cover](/images/rXcEHypauSasUTgeSYShHrfd/thumbs/thumb175x175.webp)
The recommended tire pressure for the 2018 Chevrolet Trax is typically 35 PSI for both front and rear tires. Always check the sticker inside the driver's door or the owner's manual for the most accurate information.
To reset the oil change light on a 2018 Chevrolet Trax, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal fully three times within five seconds. The oil life should reset to 100%.
The 2018 Chevrolet Trax typically requires SAE 5W-30 full synthetic oil. It is always best to consult the owner's manual for the specific oil type recommended for your vehicle.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, maintaining correct tire pressure, and removing unnecessary weight from the vehicle. Driving habits can also impact efficiency, so avoid rapid acceleration and braking.
The 2018 Chevrolet Trax is not specifically designed for towing and does not have an official towing capacity. It is not recommended to tow with this vehicle.
To replace the cabin air filter in a 2018 Chevrolet Trax, open the glove box and remove the limiting arm. Press in on the sides of the glove box to release it. The cabin air filter is located behind the glove box compartment. Remove the old filter and replace it with a new one.
The "Service StabiliTrak" warning light indicates a potential issue with the vehicle's stability control system. It is advised to have the vehicle inspected by a professional mechanic to diagnose and resolve any underlying issues.
For the 2018 Chevrolet Trax, it is generally recommended to change the transmission fluid every 45,000 to 60,000 miles. Always refer to the owner's manual for specific intervals for your driving conditions.
To connect your phone via Bluetooth in a 2018 Chevrolet Trax, enable Bluetooth on your phone, press the "Phone" button on the vehicle's infotainment system, and select "Pair Device". Follow the prompts to complete the pairing process.
If the key fob for your 2018 Chevrolet Trax is not working, first try replacing the battery. If the problem persists, reprogramming might be necessary or there could be an issue with the vehicle's receiver. Consult a professional if needed.