Chevrolet Traverse 2018 Getting To Know Your Manual

The recommended tire pressure for a Chevrolet Traverse 2018 is 35 psi for both the front and rear tires.
To reset the oil life monitor on a Chevrolet Traverse 2018, turn the ignition to the "On" position without starting the engine. Use the DIC controls on the steering wheel to navigate to the "Oil Life" menu. Press and hold the "SET/CLR" button until the display shows 100%.
Chevrolet recommends using SAE 5W-30 full synthetic engine oil for the Traverse 2018.
To pair your smartphone, ensure Bluetooth is enabled on your phone, then navigate to the "Phone" menu on the Traverse's infotainment system, select "Pair Device," and follow the prompts to connect.
If the check engine light comes on, ensure the gas cap is tightened. If the light remains on, consult a certified mechanic or dealership for diagnostics.
To replace the cabin air filter, locate the filter housing under the passenger side dashboard, remove the cover, replace the old filter with a new one, and reattach the cover.
The towing capacity of a Chevrolet Traverse 2018 is up to 5,000 pounds when properly equipped with the trailer towing package.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, drive at moderate speeds, and avoid excessive idling.
To replace a headlight bulb, open the hood, locate the headlight assembly, remove the electrical connector and bulb cover, replace the bulb, and reassemble.
Common issues include transmission problems, electrical system glitches, and AC failures. Regular maintenance and timely repairs by certified technicians can help address these issues.