Chevrolet Traverse 2017 Getting To Know Your Manual
![Chevrolet Traverse 2017 manual cover](/images/ONbKBCsxdFcuftROclGEmDBx/thumbs/thumb175x175.webp)
The recommended oil type for a 2017 Chevrolet Traverse is 5W-30 fully synthetic oil. Always refer to the owner's manual for the most accurate information.
To reset the oil change light, turn the ignition to the "On" position without starting the engine. Use the DIC (Driver Information Center) controls to find the "Oil Life" menu, then press and hold the "SET/CLR" button until the oil life resets to 100%.
The 2017 Chevrolet Traverse has a towing capacity of up to 5,200 pounds when properly equipped. Ensure your vehicle has the towing package installed before attempting to tow heavy loads.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes and air filter replacements. Keep tires properly inflated and avoid excessive idling. Use cruise control on highways where possible.
Common issues include transmission problems and air conditioning failures. Regular maintenance and timely repairs are crucial. For transmission issues, ensure fluid levels are correct and consider a professional inspection if problems persist.
To pair your phone, enable Bluetooth on your device and select "Chevrolet MyLink" from the list of available devices. Follow the prompts on both the phone and the vehicle's touchscreen to complete the pairing process.
The 2017 Chevrolet Traverse can seat up to eight passengers, depending on the configuration. Some models offer seven-passenger seating with second-row captain's chairs.
It is generally recommended to change the transmission fluid every 45,000 miles. However, check the owner's manual for specific intervals and follow any severe service recommendations if applicable.
The recommended tire pressure for the 2017 Chevrolet Traverse is typically 35 psi for both front and rear tires. Always verify with the tire information placard located on the driver's side door jamb.
To replace the air filter, open the hood and locate the air filter box. Unclip the latches or remove screws, take out the old filter, and insert the new one ensuring it fits snugly. Secure the box back in place.