Chevrolet Trailblazer 2023 Getting To Know Your Manual
![Chevrolet Trailblazer 2023 manual cover](/images/VDjCURARNPIibSDEDZMqBUxJ/thumbs/thumb175x175.webp)
The recommended oil type for the Chevrolet Trailblazer 2023 is SAE 5W-30 full synthetic oil. Always refer to the owner's manual for any specific requirements.
To reset the tire pressure monitoring system, turn the ignition to the "ON" position without starting the engine. Press the "Set/Reset" button until the tire pressure menu displays, then hold the button until the system resets.
To update the infotainment system software, connect your vehicle to a Wi-Fi network, navigate to Settings > System > Updates on the display, and follow the on-screen instructions to download and install updates.
The maximum towing capacity of the Chevrolet Trailblazer 2023 is up to 1,000 pounds when properly equipped. Be sure to check your specific vehicle's configuration and towing guidelines.
To pair your smartphone, enable Bluetooth on your phone, go to the vehicle's infotainment system, select Phone > Connect Phone > Add Phone, and follow the prompts to complete the pairing process.
If the check engine light turns on, ensure the gas cap is tight as a loose cap can trigger the light. If the light remains, consult your Chevrolet dealer or a qualified mechanic for a diagnostic.
To change the wiper blades, lift the wiper arm away from the windshield, press the release tab on the wiper blade, slide it off the wiper arm, and attach the new blade by sliding it onto the arm until it clicks into place.
It is recommended to rotate the tires every 7,500 miles to ensure even tire wear and extend the lifespan of the tires. Consult your owner's manual for specific recommendations.
To jump-start the vehicle, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the booster battery. Connect the negative cable to the negative terminal of the booster battery, then to an unpainted metal surface on the engine block of the dead car, away from the battery. Start the booster vehicle first, then the Trailblazer.
To enable cruise control, press the cruise control button on the steering wheel to turn it on. Accelerate to your desired speed, then press the "Set" button to maintain that speed. Use the "+" or "-" buttons to adjust the speed as needed.