Chevrolet Tahoe 2018 Getting To Know Your Manual
![Chevrolet Tahoe 2018 manual cover](/images/RdSRTAQAOXVJLpiovTqczGiC/thumbs/thumb175x175.webp)
To reset the oil life indicator, turn the ignition to the "On" position without starting the engine. Use the arrow buttons on the steering wheel to navigate to the "Oil Life" screen on the driver information center. Press and hold the "Checkmark" button until the oil life percentage resets to 100%.
The recommended tire pressure for a 2018 Chevrolet Tahoe is typically 35 PSI for both front and rear tires. However, it's best to verify this information on the tire placard located on the driver's side door jamb.
To connect your smartphone, ensure that Bluetooth is enabled on your device. On the MyLink system, go to "Phone" > "Pair Device" and follow the instructions to pair your phone. Confirm any prompts on your phone to complete the connection.
The 2018 Chevrolet Tahoe typically requires SAE 5W-30 engine oil. It's important to use oil that meets the GM dexos1 specification to ensure optimal engine performance and protection.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the protective cover, disconnect the wiring harness, and twist the bulb socket counterclockwise to remove it. Replace the bulb and reassemble in reverse order.
The check engine light can illuminate for various reasons, such as a loose gas cap, faulty oxygen sensor, or issues with the catalytic converter. It's recommended to use an OBD-II scanner to read the diagnostic trouble codes or visit a professional mechanic for evaluation.
To update the navigation system, visit the Chevrolet website or contact a Chevrolet dealer to obtain the latest map update. Follow the provided instructions to install the update, which may involve using a USB drive.
The towing capacity of the 2018 Chevrolet Tahoe varies depending on the configuration, but it can tow up to 8,600 pounds when properly equipped. Always refer to the owner’s manual for specific towing guidelines and requirements.
To program a new key fob, insert the existing key into the ignition and turn it to "On." Use the vehicle's Driver Information Center to enter the "Settings" menu, select "Remote Lock, Unlock, Start," then "Remote Relearn," and follow the prompts.
If you experience battery drain, check for any lights or accessories left on. Inspect the battery terminals for corrosion. If the problem persists, consult a mechanic to check for electrical system issues or a failing battery.