Chevrolet Silverado 2500 2019 Getting To Know Your Manual
![Chevrolet Silverado 2500 2019 manual cover](/images/yLigCbIBwrekyPJSIogcJcna/thumbs/thumb175x175.webp)
The recommended engine oil for the 2019 Chevrolet Silverado 2500 is SAE 0W-20 for the 6.0L V8 engine and SAE 5W-30 for the 6.6L Duramax Diesel engine. It's important to use an oil that meets the GM dexos1 specification.
It is generally recommended to change the transmission fluid every 45,000 to 60,000 miles under normal driving conditions. However, always refer to your owner's manual for the manufacturer’s specific maintenance schedule for your vehicle.
The 2019 Chevrolet Silverado 2500 has a towing capacity of up to 14,500 pounds when properly equipped. This capacity can vary based on the engine type and configuration of the vehicle, so it's important to check the specific details for your model.
To reset the "Change Engine Oil" light, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal to the floor three times within 5 seconds. The light should reset. If it doesn't, repeat the process.
Common issues with the 6.6L Duramax Diesel engine include injector failures, overheating, and turbocharger problems. Regular maintenance and using quality fuel can help mitigate these issues.
To improve fuel efficiency, maintain proper tire pressure, use the recommended grade of motor oil, reduce excess weight, and drive at steady speeds. Regular maintenance such as changing air filters and performing tune-ups can also help.
If you experience brake issues, first check the brake fluid level and inspect the brake pads and rotors for wear. If the issue persists, it is advisable to have a professional mechanic inspect the braking system for any faults.
Yes, you can install larger tires, but it's important to ensure they fit properly and don't rub against the wheel wells or suspension components. Consider consulting with a tire specialist to ensure compatibility with your vehicle's specifications.
Start by checking the refrigerant level, inspecting the compressor and belts, and ensuring the cabin air filter is clean. If the issue persists, it may require professional diagnostics to check for leaks or electrical problems.
Regular maintenance checks include oil changes, tire rotations, brake inspections, checking fluid levels (coolant, brake, transmission), inspecting belts and hoses, and ensuring the air filter is clean. Refer to the owner’s manual for a complete maintenance schedule.