Chevrolet Silverado 2017 Getting To Know Your Manual

For the 2017 Chevrolet Silverado, it is recommended to use SAE 5W-30 viscosity grade oil that meets GM dexos1 specifications.
To reset the oil change light, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal slowly three times within five seconds. Turn the ignition off and then start the engine to verify the reset.
The towing capacity of the 2017 Chevrolet Silverado varies depending on the engine and configuration, ranging from 5,500 to 12,500 pounds.
To improve fuel efficiency, ensure regular maintenance like timely oil changes, proper tire inflation, and clean air filters. Additionally, avoid excessive idling and aggressive driving.
The recommended tire pressure for the 2017 Chevrolet Silverado is typically 35 PSI for both front and rear tires, but it's best to check the sticker on the driver's side door jamb for exact specifications.
To pair your smartphone, enable Bluetooth on your phone, press the "Phone" button on the Silverado's infotainment system, and select "Pair Device." Follow the prompts on both the screen and your phone to complete the pairing process.
The check engine light can illuminate for various reasons, such as a loose gas cap, faulty oxygen sensor, or misfiring engine. It is recommended to use an OBD-II scanner to diagnose the specific issue or consult a professional mechanic.
For the 2017 Chevrolet Silverado, it is generally recommended to change the transmission fluid every 45,000 to 60,000 miles, but it's best to consult the owner's manual for specific intervals.
If the battery keeps dying, check for electrical issues such as a faulty alternator, corrosion on battery terminals, or a parasitic drain. Ensure all lights and electronics are off when the vehicle is not in use. Consider having the battery and charging system tested.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the wiring harness, take out the old bulb, and insert the new bulb, ensuring it is secured properly. Reattach the wiring harness and test the headlight.