Chevrolet Silverado 2016 Getting To Know Your Manual
![Chevrolet Silverado 2016 manual cover](/images/PseksCekdrbHPqdkQMIaBiCP/thumbs/thumb175x175.webp)
To connect your phone to the Chevrolet Silverado 2016, turn on your vehicle and enable Bluetooth on your phone. Navigate to the "Phone" menu on the Silverado's infotainment system, select "Pair Device," and follow the on-screen instructions to complete the pairing process.
The recommended oil for the Chevrolet Silverado 2016 is SAE 5W-30 full synthetic oil. Always refer to your owner's manual for specific recommendations based on your engine type.
To reset the TPMS, turn the key to the "ON" position without starting the engine. Press and hold the TPMS reset button, typically located under the steering wheel, until the tire pressure light blinks three times. Drive the vehicle for about 20 minutes to complete the reset.
The towing capacity of the Chevrolet Silverado 2016 varies depending on the engine and configuration, ranging from 5,500 to 12,000 pounds. Consult your owner's manual or vehicle specifications for exact figures.
Start by checking the AC fuse and relay. Ensure the blower motor is functioning and inspect for any refrigerant leaks. Consider consulting a professional mechanic if the issue persists after these checks.
It is recommended to rotate the tires every 7,500 miles to ensure even tire wear and extend the life of your tires.
Locate the cabin air filter housing behind the glove box. Remove the glove box by detaching its fasteners, then slide out the old filter and replace it with a new one. Reattach the glove box after the replacement.
To activate cruise control, press the "On/Off" button on the left side of the steering wheel. Accelerate to your desired speed, then press the "Set" button to maintain the speed. Adjust speed using the "+" or "-" buttons.
If the check engine light comes on, check for any obvious issues such as a loose gas cap. If the light remains on, use an OBD-II scanner to check for error codes and consult a mechanic for further diagnostics.
Lift the wiper arm away from the windshield, press the tab or button on the wiper blade to release it, and slide the blade off the arm. Align the new blade and snap it into place until secure. Lower the wiper arm back onto the windshield.