Chevrolet Silverado 2015 Getting To Know Your Manual
![Chevrolet Silverado 2015 manual cover](/images/fhgPrOPFCBHjseCnkYztbPVe/thumbs/thumb175x175.webp)
Turn the ignition to the "On" position without starting the engine. Press the accelerator pedal fully three times within five seconds. The oil life system should reset.
The recommended oil type for the 2015 Chevrolet Silverado is SAE 5W-30 for most operating conditions. Check the owner's manual for specific recommendations based on your engine type and climate.
Open the glove box and remove the damper cord by sliding it off the hook. Squeeze the sides of the glove box inward to release it from its catches and lower it down. The cabin air filter cover will be visible; remove it and replace the old filter with a new one.
The towing capacity varies by model and configuration, ranging from 5,500 to 12,000 pounds. Refer to your specific model's manual for precise capacities.
Use an OBD-II scanner to read the diagnostic trouble codes (DTCs). These codes will give you insight into what might be causing the check engine light to illuminate. After repairs, clear the codes and see if the light returns.
Check the refrigerant level and recharge if necessary. Also, inspect the air conditioning compressor, condenser, and fuses for any issues. If the problem persists, consult a professional technician.
Maintain proper tire pressure, perform regular maintenance such as oil changes and air filter replacements, and avoid aggressive driving habits. Consider removing excess weight from the vehicle and using cruise control on highways.
It's recommended to replace the spark plugs every 60,000 to 100,000 miles, depending on your driving conditions and engine model. Always refer to the owner's manual for the best guidance.
The recommended tire pressure is usually listed on a sticker inside the driver’s door jamb. Typically, it should be around 35 PSI for the front and rear tires, but always verify with the specific recommendation for your vehicle model.
Go to the “Settings” menu on your smartphone and enable Bluetooth. In the Silverado, press the “Phone” button on the infotainment system, then select “Pair Device.” Follow the prompts to complete the pairing process.