Chevrolet Malibu 2022 Getting To Know Your Manual
![Chevrolet Malibu 2022 manual cover](/images/JNfhTeLaIRxdWChNgwjaAFBX/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, turn the ignition to the ON position without starting the engine. Press the "Menu" button on the steering wheel until the "Tire Pressure" screen appears. Hold the "SET/CLR" button until the horn sounds twice, indicating the reset is complete.
Chevrolet recommends using SAE 5W-30 full synthetic oil for the 2022 Malibu. Always check your owner’s manual or consult with a certified dealer for confirmation.
To improve fuel efficiency, ensure regular maintenance like oil changes and air filter replacements. Keep tires properly inflated, use cruise control on highways, and avoid excessive idling.
If the check engine light illuminates, ensure the gas cap is tight. If the light remains on, schedule a diagnostic check at a Chevrolet service center to identify potential issues.
To connect your smartphone, enable Bluetooth on your device. In the Malibu’s infotainment screen, select "Phone" > "Connect Phone" > "Add Phone". Follow the on-screen prompts to complete the pairing process.
Chevrolet recommends an oil change every 7,500 miles, tire rotation every 7,500 miles, and a comprehensive inspection every 15,000 miles. Always refer to the owner’s manual for detailed maintenance intervals.
Locate the fuse box under the hood or inside the cabin. Use the fuse diagram on the cover to identify the blown fuse. Remove it using a fuse puller and replace it with a new fuse of the same amperage.
First, check the refrigerant level and ensure the cabin air filter is clean. If these are fine, inspect for any leaks or consult a professional technician for further diagnosis.
Lift the wiper arm and turn the blade perpendicular to the arm. Press the release tab and slide the blade off. Attach the new blade by sliding it onto the arm until it clicks into place.
To update the navigation system, download the latest map update from the Chevrolet website onto a USB drive. Insert the USB drive into the vehicle's USB port and follow the on-screen instructions to install the update.