Chevrolet Corvette 2012 Getting To Know Your Manual
![Chevrolet Corvette 2012 manual cover](/images/YLyIEGyQsxGSQJrsEFrIrqZS/thumbs/thumb175x175.webp)
The recommended oil type for a 2012 Chevrolet Corvette is SAE 5W-30 full synthetic motor oil.
To reset the TPMS, turn the ignition to the ON position, press the DIC button until the RELEARN TIRE POSITIONS message appears, then press and hold the SET/RESET button until a double horn chirp sounds.
To jump-start your Corvette, connect the positive cable to the positive terminal of the dead battery and the booster battery. Connect the negative cable to the negative terminal of the booster battery and a metal part of the Corvette's engine block. Start the booster vehicle, then the Corvette.
The air filter should be inspected every 15,000 miles and replaced every 30,000 miles or as needed based on driving conditions.
The 2012 Chevrolet Corvette is not designed for towing and does not have a specified towing capacity.
To replace a headlight bulb, open the hood, remove the headlight assembly by releasing the retaining clips and bolts, disconnect the electrical connector, and replace the bulb. Reinstall the assembly in reverse order.
To check the transmission fluid, drive the car until it's warm, park on a level surface, and with the engine running, remove the dipstick from the transmission. Wipe it clean, reinsert it, then remove it again to check the fluid level.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements, maintain proper tire pressure, avoid excessive idling, and drive at steady speeds.
The recommended coolant is a 50/50 mixture of Dex-Cool antifreeze and clean water.
To program a new key fob, insert the existing key into the ignition, turn it to the ON position, then off. Insert the new key and turn it to the ON position. Wait for the security light to turn off, indicating successful programming.