Chevrolet Colorado ZR2 2021 Getting To Know Your Manual
![Chevrolet Colorado ZR2 2021 manual cover](/images/mPRjRzQUFLLEgxpdfiXAmPjY/thumbs/thumb175x175.webp)
To engage the four-wheel drive, use the transfer case knob located on the dashboard. Turn the knob to select between 2WD, 4WD High, and 4WD Low. Ensure the vehicle is in neutral when switching between 4WD modes.
The recommended tire pressure for the Chevrolet Colorado ZR2 2021 is typically 35 psi for both front and rear tires. Always check the tire information placard located on the driver's side door pillar for confirmation.
It is recommended to change the oil every 7,500 miles or 12 months, whichever comes first. However, if the vehicle is used for towing or in extreme conditions, more frequent changes may be necessary.
The Chevrolet Colorado ZR2 2021 requires SAE 5W-30 fully synthetic motor oil. Always refer to the owner's manual for specific oil recommendations.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, drive at steady speeds, and avoid excessive idling. Removing unnecessary weight can also help.
If your vehicle won't start, check the battery terminals for corrosion, ensure the battery is charged, and make sure the gear is in Park or Neutral. If the problem persists, consult a professional mechanic.
To replace a flat tire, use the jack and wrench located under the rear seat. Loosen the lug nuts, lift the vehicle with the jack, remove the lug nuts, and replace the flat tire with the spare. Secure the lug nuts in a crisscross pattern.
To reset the TPMS, ensure all tires are properly inflated. Turn the ignition to the 'On' position, press and hold the TPMS reset button until the light blinks twice. Drive the vehicle for 10 minutes at 50 mph to recalibrate.
The Chevrolet Colorado ZR2 2021 has a towing capacity of up to 5,000 pounds. However, always check the owner’s manual for specific configurations and towing guidelines.
To connect your smartphone, enable Bluetooth on your phone, then access the infotainment system's Bluetooth menu. Select 'Pair Device' and follow the on-screen instructions to complete the pairing process.