Chevrolet Colorado 2017 Getting To Know Your Manual
![Chevrolet Colorado 2017 manual cover](/images/cLbbfVNYaKhQwqjdHpMaaGPN/thumbs/thumb175x175.webp)
To reset the oil life monitor, turn the ignition to the ON position without starting the engine. Press the MENU button until the vehicle information menu is displayed, then use the arrow keys to select 'Oil Life'. Press and hold the SET/CLR button until the display shows 100%.
The 2017 Chevrolet Colorado is recommended to use SAE 5W-30 viscosity grade engine oil for the 2.5L engine and SAE 0W-20 for the 3.6L engine. Always use engine oil that meets GM dexos1™ specifications.
If your Colorado won't start, check the battery for corrosion or loose connections, ensure the fuel tank isn't empty, and verify the starter and ignition fuses. If these are fine, consider consulting a professional mechanic for further diagnosis.
The towing capacity of the 2017 Chevrolet Colorado varies by engine: up to 3,500 lbs for the 2.5L engine, up to 7,000 lbs for the 3.6L V6, and up to 7,700 lbs with the 2.8L Duramax Turbo-Diesel engine when properly equipped.
To pair your smartphone, enable Bluetooth on your device. In the truck, press the 'Phone' button on the Chevrolet MyLink screen, select 'Pair Device', and choose your phone from the list. Follow the prompts to complete pairing.
The check engine light can be triggered by various issues, such as a loose gas cap, faulty oxygen sensor, or issues with the catalytic converter. It's best to have a diagnostic scan performed to identify the specific cause.
It is recommended to change the air filter every 15,000 to 30,000 miles, depending on driving conditions. If you frequently drive in dusty or harsh environments, consider replacing it more often.
The recommended tire pressure for the 2017 Chevrolet Colorado is typically 30-35 psi for both front and rear tires. Always refer to the sticker located on the driver’s door jamb for the most accurate information.
To change a flat tire, ensure the vehicle is on a flat surface and apply the parking brake. Use the jack to lift the vehicle, remove the lug nuts with a wrench, replace the tire with the spare, and tighten the lug nuts in a criss-cross pattern. Lower the vehicle and ensure all lug nuts are secure.
To replace a headlight bulb, open the hood and locate the headlight assembly. Remove the connector from the bulb, then twist the bulb counterclockwise to remove it. Insert the new bulb, twisting it clockwise to secure, and reconnect the wiring.