Candy VITA G372TM 1-S User Manual
![Candy VITA G372TM 1-S manual cover](/images/dYRZOMoPlIDrOZkVxkhuItyr/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add detergent to the dispenser. Turn the program selector knob to the desired wash cycle. Press the start button to begin the wash.
Ensure the machine is plugged in and the power switch is turned on. Check the door to make sure it is closed properly. Verify that you have selected a program and pressed the start button. If the issue persists, consult the manual or contact customer support.
To clean the detergent drawer, gently pull it out until it stops, then press the release lever to remove it completely. Wash the drawer under running water and use a soft brush to clean any residue. Once clean, reinsert the drawer into its slot.
Ensure that the washing machine is level on the floor. Check if the transit bolts have been removed. Make sure the laundry is evenly distributed in the drum. Avoid overloading the machine.
To perform a drum clean, ensure the drum is empty. Select the hottest wash cycle and add a drum cleaning detergent or white vinegar. Run the cycle to clean the drum effectively.
Regularly clean the detergent drawer and filter. Check and clean the door seal to remove any debris. Run a drum clean cycle monthly. Ensure the machine is level and stable to prevent excessive vibration.
Check the door seal for damage or debris. Ensure the detergent drawer is closed properly. Inspect the hoses for leaks or damage. Verify that the drain pump filter is secure and not clogged.
Wash full loads instead of partial ones. Use eco-friendly wash cycles. Wash at lower temperatures when possible. Regularly maintain the machine to ensure optimal efficiency.
Ensure the machine is level and stable. Check for foreign objects like coins or buttons in the drum. Make sure the transit bolts have been removed. If noises persist, contact a service technician.
Wait a few minutes as the door may take time to unlock after a cycle. If it remains locked, turn off the machine and unplug it for a few minutes. If the issue continues, consult the user manual or contact customer support.