Candy ROE H9A2TCE-80 User Manual
![Candy ROE H9A2TCE-80 manual cover](/images/NwWkEczKpmzijVTibteRhhvb/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the filter at the bottom. Pull it out gently, remove the lint by hand, and rinse it under warm water if necessary. Make sure it's completely dry before reinserting it.
Check if the dryer is set to a heat cycle and ensure the lint filter is clean. If the issue persists, inspect the vent system for blockages and verify that the power supply is adequate. If these do not resolve the issue, professional service may be needed.
To use the delay start feature, select your desired drying program, press the delay start button, and adjust the time using the control panel. Confirm your selection and press the start button to activate the delay.
Regular maintenance includes cleaning the lint filter after each use, checking the venting system for obstructions monthly, and wiping down the dryer drum and door seal to prevent residue build-up.
Ensure the dryer is level and not overloaded. Check for foreign objects in the drum and inspect the drum rollers and belt for wear. If noise persists, consider contacting a technician.
Check for a blown fuse or tripped circuit breaker. Ensure the door is fully closed and the start button was pressed firmly. If the problem continues, examine the thermal fuse and door switch for issues.
To reduce energy consumption, use moisture sensors or automatic cycles instead of timed drying. Clean the lint filter regularly, and avoid overloading the dryer. Opt for lower heat settings when possible.
Ensure that the dryer has adequate ventilation to prevent overheating. Maintain at least an inch of space around the dryer and follow installation guidelines provided in the user manual.
Avoid drying items labeled as "do not tumble dry" such as delicate fabrics, wool, or articles with rubber or foam backing. Always check the care labels on your garments.
To reset the dryer, unplug it from the power source for about one minute, then plug it back in. If the dryer continues to malfunction, refer to the user manual or contact customer support.