Candy TO H8A2DEM-S User Manual

To reset your Candy TO H8A2DEM-S dryer, unplug the appliance from the power source, wait for about 5 minutes, and then plug it back in. This should reset the control board.
Check if the dryer is connected to a power source and ensure the circuit breaker is not tripped. Also, clean the lint filter and check if the heating element is functioning properly.
Open the dryer door, locate the lint filter at the bottom, pull it out, and clean off the lint. Rinse it under running water if necessary and dry completely before reinserting.
The maximum load capacity for the Candy TO H8A2DEM-S dryer is 8 kilograms. Overloading the dryer can affect its performance and may cause damage.
Unusual noises can be caused by a variety of factors, including loose objects in the drum, worn-out drum rollers, or a faulty belt. Inspect the drum interior and the components to identify and resolve the issue.
Press the 'Delay Start' button on the control panel, select the desired time delay using the dial, and then press the start button to activate the function. This allows the dryer to begin its cycle after a set period.
Regular maintenance includes cleaning the lint filter after every use, checking the exhaust vent for blockages, and wiping down the exterior and interior surfaces to remove dust and lint.
Ensure the dryer is plugged in and the door is fully closed. Check the fuse and circuit breaker, and make sure the start button is functioning. If the problem persists, consult the manual or contact a technician.
This can be due to a clogged lint filter, obstructed exhaust vent, or overloading. Ensure all these elements are in optimal condition and avoid loading the dryer beyond its capacity.
Yes, the Candy TO H8A2DEM-S dryer can be stacked on top of a compatible washing machine using a stacking kit. Ensure both appliances are securely fastened to prevent accidents.