Candy ROW41496DWMC-19 User Manual

To start a drying cycle, first ensure that the dryer is plugged in and the door is securely closed. Select the desired drying program using the program selector dial, and then press the start button.
If the dryer is not heating, check to ensure that the power supply is adequate and the circuit breaker is not tripped. Also, clean the lint filter and check for blockages in the vent. If the issue persists, consult the user manual or contact a professional technician.
To clean the lint filter, open the dryer door and locate the filter in the door opening. Pull the filter out, remove the lint, and then rinse it under running water. Once dry, place the filter back into its slot.
Regular maintenance includes cleaning the lint filter after every load, checking and cleaning the exhaust vent periodically, and wiping the drum and exterior surfaces with a damp cloth.
Unusual noises could be caused by items caught in the drum or a loose belt. Check for foreign objects inside the drum or contact a technician to inspect the belt and other components.
Refer to the user manual for guidance on selecting the appropriate program based on fabric type. Generally, delicate fabrics require a gentler setting, while heavier fabrics like towels may need a more intensive cycle.
If the dryer stops mid-cycle, check if the power supply is interrupted or if the door is not fully closed. Also, ensure the water container is not full if your model has a condenser. Restart the cycle if necessary.
To minimize wrinkles, promptly remove clothes from the dryer at the end of the cycle. Use the appropriate drying program and avoid overloading the dryer. Additionally, consider using the wrinkle guard feature if available.
Longer drying times may result from a clogged lint filter or blocked vent. Ensure both are clean and unobstructed. Additionally, check if the chosen drying program is appropriate for the load size and fabric type.
Yes, the door swing can be reversed on most models. Refer to the user manual for specific instructions or contact a professional technician to perform this task.