Candy ROW 4964DWME 1-S User Manual
![Candy ROW 4964DWME 1-S manual cover](/images/wymJILZXuRYNXBalNlEuqGwd/thumbs/thumb175x175.webp)
To start a drying cycle, first ensure the dryer is plugged in and the door is securely closed. Select the desired drying program using the program dial and press the start button to begin the cycle.
If the dryer is not heating, check if the lint filter is clean and the exhaust vent is not blocked. Additionally, verify that the temperature settings are correct and inspect the heating elements for damage.
To clean the lint filter, open the dryer door, locate the filter at the bottom of the door opening, and pull it out. Remove any lint by hand or with a soft brush, then rinse the filter under warm water. Allow it to dry completely before reinserting.
Regularly clean the lint filter before or after each drying cycle, ensure the exhaust vent is clear, and periodically wipe the drum and door seals with a damp cloth to maintain optimal dryer performance.
To reset the dryer after a power failure, simply unplug the machine from the power outlet, wait for a few minutes, and then plug it back in. Ensure the door is closed properly, and restart the desired drying program.
Unusual noises may be due to items caught in the drum seal, a loose drum belt, or foreign objects in the drum. Check for any obstructions and ensure the dryer is level on the ground.
To prevent wrinkles, do not overload the dryer, remove clothes promptly after the cycle ends, and use the 'anti-crease' function if available. Additionally, shake out clothes before placing them in the dryer.
Error code 'E03' typically indicates a drainage issue. Check the drainage system for blockages and ensure the drain hose is not kinked. Cleaning the pump filter may also resolve this issue.
Yes, you can dry delicate fabrics by using the specific 'delicate' program on the dryer, which uses lower temperatures to protect fragile materials. Always check the garment care label before drying.
If the dryer stops mid-cycle, check if there is a power interruption, ensure the door is fully closed, and that the water tank is not full (if applicable). Restart the cycle or select a new program if necessary.