Candy ROW 4854DWME 1-S User Manual

To start a drying cycle, load your laundry into the drum, select the desired drying program using the program selector knob, and press the start button. Ensure the door is securely closed before starting the cycle.
If your dryer won't start, check if it is properly plugged in and the power supply is active. Ensure the door is closed tightly. If the problem persists, check the fuse or circuit breaker.
To clean the lint filter, open the dryer door and locate the filter at the bottom of the door opening. Pull it out, remove any lint, and rinse it under warm water if needed. Ensure it is completely dry before reinserting.
To reduce energy consumption, always dry a full load without overloading, use the sensor drying functions, and clean the lint filter regularly. Opt for lower temperature settings when possible.
To prevent clothes from shrinking, select a low heat setting or use the wool or delicate program for sensitive fabrics. Always check garment care labels before drying.
If your dryer is making unusual noises, check for any objects trapped inside the drum or filter. Inspect the drum for any signs of damage. If the issue continues, contact a service technician.
Ensure the lint filter is clean, avoid overloading, and use appropriate drying programs for different types of fabrics. Make sure the air vent is not blocked.
If your dryer takes longer to dry, it could be due to a clogged lint filter or blocked vent system. Check for these issues and ensure the load size is appropriate for the selected program.
To use the delay start feature, select the desired drying program, press the delay start button, and set the delay time using the control panel. Press the start button to activate the delay.
Regular maintenance includes cleaning the lint filter after each cycle, checking the vent system for blockages, and ensuring the drum and door seal are clean. Schedule professional servicing annually.