Candy RO 1294DXH5 User Manual
![Candy RO 1294DXH5 manual cover](/images/QYeKGCtwxUjKMQVQWciHktLp/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum, add detergent to the appropriate compartment, select the desired wash program using the control knob, and press the start/pause button.
Check if the drain hose is kinked or blocked. Ensure that the filter is clean and free of debris. If the problem persists, consult the user manual or contact customer support for assistance.
Remove the detergent drawer by pulling it out and pressing the release lever. Rinse it under warm water to remove any detergent residue. Use a brush to clean hard-to-reach areas before reassembling.
Regularly clean the detergent drawer, filter, and drum. Check and clean the door seal for dirt and lint. Run a maintenance wash with an empty load and a washing machine cleaner every month.
Ensure the washing machine is level and all four feet are firmly on the ground. Check that the load is balanced and not too heavy on one side. Adjust the load and try again.
Examine the door seal for any damage or foreign objects. Check the hose connections at the back of the machine for tightness. If the issue continues, contact a technician for repair.
Use lower temperature settings when possible, ensure full loads without overloading, and regularly maintain the machine to keep it running efficiently.
To reset the washing machine, turn it off and unplug it from the power source. Wait a few minutes, then plug it back in and turn it on. This can help reset the control board.
Select a gentle or delicate cycle with a low spin speed, and use a mild detergent. Wash at a lower temperature to protect the fabric fibers.
After each wash, leave the door open to allow the drum to air out. Regularly clean the door seal and run an empty hot wash cycle with a washing machine cleaner to prevent mold buildup.