Candy RO 1284DXH5 1-S User Manual
![Candy RO 1284DXH5 1-S manual cover](/images/yVxhyDnZJpLQNBmSJsxrZeuK/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add detergent to the detergent drawer. Select the desired wash program using the control dial. Press the 'Start/Pause' button to begin the cycle.
Ensure that the machine is plugged in and that the power outlet is working. Check if the door is closed properly. Make sure the 'Start/Pause' button has been pressed. If the issue persists, consult the user manual or contact customer support.
To clean the filter, disconnect the machine from the power supply. Open the filter cover located at the bottom of the front panel. Turn the filter knob counterclockwise to remove it, then rinse it under running water. Reinsert the filter and secure it by turning it clockwise.
Error code E03 indicates a drainage issue. Check for blockages in the drain hose or pump filter. Ensure that the drain hose is not kinked or clogged. Clean the filter if necessary.
To use the delay start function, select the desired wash program, then press the 'Delay Start' button. Use the control dial to set the delay time. Press 'Start/Pause' to activate the delay timer.
Regularly clean the detergent drawer and filter. Check and clean the drum and door seal to prevent mold. Run a maintenance wash with vinegar or a machine cleaner to descale and sanitize the drum every few months.
Ensure the washing machine is level by adjusting the feet. Avoid overloading the drum and ensure an even distribution of laundry. Check that the transport bolts have been removed.
If the door won't open, wait a few minutes as the lock mechanism might still be engaged. Check if the 'Child Lock' is activated. If necessary, perform a manual release as outlined in the user manual.
Refer to the program chart in the user manual which provides guidance on selecting programs based on fabric type and soil level. Use the control dial to select the appropriate program.
Yes, you can pause the wash cycle by pressing the 'Start/Pause' button. Wait for the door lock to release, then add or remove items. Close the door and press 'Start/Pause' again to resume the cycle.