Candy RO 1284DWMCE 1-S User Manual
![Candy RO 1284DWMCE 1-S manual cover](/images/tgGnbUVqOubkKEQoVrGsmMgH/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add detergent to the appropriate compartment, close the door, and select the desired program using the control panel. Press the start button to begin the cycle.
Check if the machine is plugged in and switched on. Ensure the door is closed properly. Verify that the water supply is turned on and the program is selected correctly. If the problem persists, consult the user manual or contact customer service.
Remove the detergent drawer by pulling it out gently. Wash it under warm water using a brush to remove any residue. Once clean, dry it thoroughly and slide it back into place.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter monthly. Run an empty hot wash cycle with a washing machine cleaner to remove any build-up.
Ensure the machine is level and all transport bolts are removed. Avoid overloading the drum and distribute laundry evenly. If the issue persists, consult the manual for further guidance.
Pause the wash cycle using the control panel. Wait a few minutes until the lock indicator light turns off, then open the door. Add your clothes, close the door, and resume the cycle.
Check if the drain hose is kinked or blocked. Inspect and clean the filter located at the bottom front of the machine. Ensure the drain pump is functioning correctly. Contact support if the problem continues.
It is recommended to clean the filter every month to prevent blockages and ensure efficient drainage.
Yes, use the delicate or hand wash program for delicate fabrics. Ensure to use an appropriate detergent and place delicate items in a mesh laundry bag for added protection.
Refer to the user manual for the specific error code explanation and troubleshooting steps. Most errors can be resolved by resetting the machine or addressing the root cause described in the manual.