Candy LS DSI710XUK User Manual

Pages 17

Year 2005

Language(s)

of 17

Candy LS DSI710XUK Specification

The Candy LS DSI710XUK Dishwasher is designed to blend efficiency with advanced functionality, catering to modern household needs. This built-in dishwasher features a 10-place setting capacity, making it ideal for medium-sized households. It operates with an impressive A++ energy efficiency rating, ensuring reduced energy consumption and cost-effectiveness. The appliance includes a range of wash programs, providing flexibility for various dishwashing requirements, from intensive cleaning for heavily soiled dishes to eco-friendly cycles for everyday use. The dishwasher boasts a noise level of 47 dB, enabling a quieter operation that won't disrupt household activities. Its LED display interface allows for easy selection and monitoring of programs, enhancing user convenience. The Candy LS DSI710XUK incorporates advanced sensor technology that optimizes water and energy usage by detecting the level of dirt on dishes, ensuring efficient cleaning without waste. It is equipped with an adjustable upper rack, providing versatility to accommodate larger pots and pans in the lower section. Additionally, the dishwasher features a delay start function, allowing users to schedule wash cycles at their convenience. With its sleek stainless steel finish, the Candy LS DSI710XUK not only performs efficiently but also complements modern kitchen aesthetics.

Candy LS DSI710XUK F.A.Q.

How do I properly load dishes into the Candy LS DSI710XUK dishwasher?

To properly load dishes, place larger items like pots and pans on the bottom rack facing downward for optimal cleaning and smaller items like cups and glasses on the top rack. Ensure that the spray arms can rotate freely.

What should I do if the dishwasher is not draining water?

Check if the drain hose is kinked or clogged. Also, inspect the filter and remove any debris. If the problem persists, verify that the sink drain is not blocked.

Which detergent is recommended for use with the Candy LS DSI710XUK dishwasher?

Use a high-quality dishwasher detergent in tablet, powder, or gel form. Avoid using regular dish soap as it can cause excessive suds.

How can I adjust the water hardness setting on my dishwasher?

Refer to the user manual to set the correct water hardness level. This typically involves pressing specific buttons to enter the settings mode and adjusting according to your local water supply.

What maintenance steps should I regularly perform to keep the dishwasher running efficiently?

Regularly clean the filter, check and clean the spray arms, and wipe the door seal. Run an empty cycle using a dishwasher cleaner to remove limescale and grease buildup.

How can I resolve spotting or filming on my glassware?

Ensure you are using a rinse aid to prevent spots and adjust the detergent amount if necessary. Check the water temperature and hardness settings as well.

Why is my dishwasher making unusual noises during operation?

Check for any loose items inside the dishwasher that could be rattling. Ensure that dishes are not touching each other or the spray arms. If the noise persists, inspect the pump and motor for issues.

How can I reset my Candy LS DSI710XUK dishwasher?

To reset the dishwasher, turn it off and unplug it for a few minutes, then plug it back in and restart the machine. Consult the manual for specific reset instructions if needed.

What should I do if the dishwasher does not start?

Ensure that the door is fully closed and latched. Check if the dishwasher is properly plugged in and the circuit breaker is not tripped. Make sure the water supply is turned on.

How do I clean the spray arms of my dishwasher?

Remove the spray arms by unscrewing them or pulling them out, depending on the model. Rinse them under running water and use a soft brush to remove any debris from the nozzles. Reinstall them properly.