Candy LS CD 934 UK User Manual
![Candy LS CD 934 UK manual cover](/images/bLcVtJpewKhvYSlElZnJAVQN/thumbs/thumb175x175.webp)
To reset your Candy LS CD 934 UK Dishwasher, press the reset button on the control panel for about 3 seconds. This will restart the appliance and clear minor errors.
First, check the drain hose for any clogs or kinks. Ensure the sink drain is not blocked. Clean the dishwasher filter and pump area to remove debris.
It is recommended to clean the filter once a month to ensure optimal performance and prevent blockages.
This could be due to hard water. Try using a rinse aid to help prevent this issue. Additionally, check the salt reservoir and ensure it is filled.
Ensure the dishwasher is plugged in and the door is fully closed. Check the circuit breaker and make sure the water supply is turned on.
Place larger items at the back and sides of the bottom rack. Face the soiled surfaces of dishes towards the water spray. Avoid overloading to ensure proper cleaning.
Make sure to use a rinse aid, and select a higher temperature wash cycle. Ensure the dishwasher is not overloaded, allowing air to circulate.
A humming noise is usually normal, indicating the motor is running. If the noise is loud or unusual, check for obstructions in the spray arms or pump area.
Inspect the door seal for damage and ensure it's clean. Check the water inlet and drain hoses for any leaks or damage. Tighten any loose connections.
Remove the spray arms by unscrewing or unclipping them. Rinse under warm water and use a toothpick to clear any blocked holes. Reattach securely.