Candy LB CN105 TUK User Manual
![Candy LB CN105 TUK manual cover](/images/airriXuTdUzIKASWDeBnNcWX/thumbs/thumb175x175.webp)
To clean the filter, first unplug the washing machine and locate the filter access door at the bottom front of the machine. Use a cloth to catch any water and unscrew the filter cap. Remove any debris and rinse the filter under running water before replacing it securely.
If your machine is not spinning properly, check if the load is balanced and not too heavy. Ensure the drain hose is not blocked and the filter is clean. If the problem persists, it might be a technical issue requiring a service call.
Check if the drain hose is kinked or clogged. Also, ensure the filter is not blocked. If the problem continues, there might be an issue with the pump and you may need to contact a technician.
Ensure your washing machine is level and on a stable surface. Avoid overloading the drum and check for any loose items inside the machine. Using anti-vibration pads under the feet can also help reduce noise.
Regularly clean the detergent drawer, door seal, and filter. Run an empty hot wash monthly to remove residue and prevent odors. Ensure the machine is level and avoid overloading it.
To reset your washing machine, turn the dial to the off position, unplug the machine, wait a few minutes, then plug it back in and select a new wash cycle.
This could be due to a safety lock mechanism. Wait a few minutes for the lock to release. If it remains locked, ensure the cycle is fully complete and the drum is not filled with water. In persistent cases, consult the user manual or contact support.
Inspect the door seal for damage or debris, check the hoses for leaks, and ensure they are properly connected. If necessary, tighten connections and replace any damaged parts.
Clean the drum by running an empty hot cycle with a cup of white vinegar. Regularly clean the door seal and detergent drawer, and leave the door open after use to allow the interior to dry.
Refer to the user manual to identify the error code. Common solutions include checking the water supply, ensuring the door is closed properly, and confirming the machine is not overloaded. Contact support if needed.