Candy LB AQ110TUK User Manual

To clean the detergent drawer, remove it by pulling it out until it stops, then press the release button to fully remove it. Wash it under warm water to remove any detergent residue, and use a brush if necessary. Dry thoroughly before reinserting.
First, ensure the machine is plugged in and the power socket is functioning. Check if the door is properly closed and the 'Start/Pause' button has been pressed. If the issue persists, inspect the fuse and circuit breaker.
Ensure that the washing machine is level by adjusting the feet. Avoid overloading the machine and distribute clothes evenly inside the drum. Consider using anti-vibration pads under the feet.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter monthly. Run an empty hot wash cycle with vinegar or a commercial cleaner to prevent limescale buildup.
Check all hoses for tight connections and look for visible damage. Inspect the door seal for tears or obstructions and ensure the detergent drawer is not overfilled.
Yes, use the 'Delicate' cycle specifically designed for fragile fabrics. It uses gentle drum movements and lower spin speeds to protect delicate items.
Check for blockages in the drain hose and ensure it is not kinked. Clean the pump filter, which is located at the bottom of the machine, to remove any debris.
Run a maintenance wash with hot water and a washing machine cleaner, or use white vinegar and baking soda. Keep the door slightly ajar when not in use to allow air circulation.
Do not overload the drum, use the correct amount of detergent, and select the appropriate wash cycle for the fabric type. Regular cleaning of the machine can also enhance performance.
To reset the machine, switch off the power and unplug it for a few minutes. Plug it back in, then turn it on. This can help resolve minor electronic glitches.