Candy LB ACT.S12UK User Manual
![Candy LB ACT.S12UK manual cover](/images/erqfrrWTyoCkQowmrPpleJnp/thumbs/thumb175x175.webp)
To reset the Candy LB ACT.S12UK washing machine, turn the dial to the OFF position. Wait for a few seconds, then select the desired program. This should reset any previous errors.
Ensure that the machine is plugged in and the door is closed properly. Check the fuse and ensure that the water supply is turned on. If the problem persists, consult the user manual or contact customer support.
Remove the detergent drawer by pulling it out and pressing down on the release tab. Rinse it under warm water to remove any detergent residue, then dry it and replace it in the machine.
Regularly clean the detergent drawer, check and clean the filter, and run a maintenance wash with no clothes using a washing machine cleaner every month to prevent odors and build-up.
Check if the drain hose is clogged or kinked. Also, inspect the filter for blockages. Ensure that the drain pump is functioning properly. Clean any debris and try running the machine again.
Ensure the washing machine is level by adjusting the feet. Make sure the load is balanced and not overloaded. If necessary, redistribute the clothes inside the drum.
Refer to the error code list in the user manual to identify the issue. Follow the recommended troubleshooting steps or contact customer support for further assistance.
Locate the filter access panel at the bottom of the machine. Open it and unscrew the filter cap. Remove any debris, rinse the filter under water, and replace it securely.
Yes, the machine has a dedicated wool cycle. Use a wool-specific detergent and follow the garment care labels to ensure safe washing of wool items.
Leave the door slightly ajar after each wash to allow the drum to dry. Regularly run a hot wash cycle with a washing machine cleaner and clean the detergent drawer and seal.