Candy KSEC8LF-80 User Manual
![Candy KSEC8LF-80 manual cover](/images/moXKGNyTsnxEyilMFHqxoPHw/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the lint filter at the bottom of the door opening. Pull the filter out, remove the lint by hand, and then rinse it under warm water. Ensure it is completely dry before reinserting it into the dryer.
First, ensure the dryer is plugged in and the circuit breaker is not tripped. Check if the door is properly closed, as the dryer will not start if the door is open. If the problem persists, consider checking the start button for any faults.
Regularly clean the lint filter and ensure the exhaust vent is clear of obstructions. Do not overload the dryer, and ensure there is adequate ventilation around the appliance.
Do not overload the dryer, as this can prevent proper drying. Load similar fabric types together and avoid mixing heavy items with light items. Shake out clothes before placing them in the dryer to improve airflow.
To reset the dryer, first unplug it from the power source and wait for approximately 5 minutes. Plug it back in and try starting the cycle again. If the error persists, consult the user manual for specific error code troubleshooting.
Regularly clean the lint filter after each use, check and clean the exhaust ducting every few months, and wipe the drum and exterior with a damp cloth to prevent residue build-up.
Ensure that the lint filter and exhaust vent are clean. Overloading the dryer or placing heavily soiled items can also extend drying times. Check the selected drying cycle and adjust it if necessary for the fabric type.
Yes, you can dry delicate fabrics using the appropriate cycle. Select a gentle or delicate setting and ensure that the items are suitable for tumble drying by checking their care labels.
Check for any loose items in the drum, such as coins or buttons. Ensure the dryer is level on the floor. If the noise persists, inspect the drum support rollers and belt for wear and replace them if necessary.
To use the delay start feature, select your desired drying cycle and settings, then press the delay start button. Use the time selector to set the delay duration before the cycle begins. Confirm the setting to activate the delay.