Candy GVW 496TB 1-80 User Manual

To start a drying cycle, first load your laundry into the drum and close the door securely. Select the desired drying program using the program selector knob, then press the start button.
Check if the dryer is plugged in and the power outlet is functional. Ensure the door is properly closed, and the start button is pressed. If the problem persists, inspect the fuse or circuit breaker.
Open the dryer door and locate the lint filter. Pull it out gently and remove any lint buildup. Rinse the filter under running water if necessary, dry it, and then reinsert it into the dryer.
Regularly clean the lint filter, check and clean the vent system for blockages, and wipe the drum with a damp cloth to remove any residue. Perform a more thorough cleaning every few months.
This could be due to a clogged lint filter or vent. Ensure both are clean and unobstructed. Additionally, overloading the dryer can increase drying times, so try reducing the load size.
Check for any loose items in the drum or foreign objects caught in the drum seal. If the noise persists, inspect the drum rollers, idler pulley, and motor for wear and replace if necessary.
Ensure that the power supply is stable and the door is fully closed. Check for any error codes on the display and refer to the user manual for troubleshooting steps.
To prevent wrinkles, promptly remove clothes from the dryer at the end of the cycle. You can also use the anti-wrinkle feature if available, and avoid overloading the dryer.
While it's possible to dry different fabrics together, it's best to separate heavy and light fabrics for optimal drying results. Use the appropriate drying program for each fabric type.
To reset the dryer, unplug it from the power outlet for a few minutes. Plug it back in, then select your desired program and start the cycle. This should restore normal operation.