Candy GVW 1585TC3B-80 User Manual

To clean the lint filter, open the dryer door and locate the filter at the bottom of the door opening. Pull the filter out, remove any lint by hand or with a soft brush, and then reinsert it securely before using the dryer again.
Ensure the dryer is plugged in and the socket is working. Check the door is closed properly and the start button is pressed firmly. If the issue persists, inspect the circuit breaker and reset it if necessary.
If the dryer is not heating, check if the selected cycle requires heat. Ensure the lint filter and exhaust vent are clean. If the problem continues, the heating element or thermostat may need inspection by a qualified technician.
To minimize wrinkles, promptly remove clothes from the dryer at the end of the cycle. Use the anti-crease or wrinkle guard feature if available. Shake garments out before placing them in the dryer.
Regularly clean the lint filter, check and clean the exhaust vent system to prevent blockages, and occasionally wipe the drum and exterior surfaces with a damp cloth. Conduct periodic checks for any unusual noises or vibrations.
To reset the dryer, unplug it from the electrical socket for about 5 minutes. Plug it back in and try starting it again. This can help reset any electronic controls or settings.
A banging noise may be due to an unbalanced load or foreign objects in the drum. Stop the dryer, redistribute the clothes evenly, and remove any loose items. If noises persist, inspect the drum support rollers or bearings.
It is generally not recommended to dry shoes in a tumble dryer as the heat can damage them. Consider using a drying rack or air-drying them instead. If necessary, use a low heat setting and ensure the shoes are securely fastened to prevent damage.
Use the "delicate" or "gentle" cycle designed for sensitive fabrics. This setting uses lower heat and a slower spin to protect delicate items from damage. Always check garment labels for specific drying instructions.
Improve energy efficiency by regularly cleaning the lint filter and ensuring the exhaust vent is clear. Use the correct drying cycle for the load type and size. Avoid overloading the dryer, and consider using a lower heat setting when possible.