Candy GVS C9DCRG-80 User Manual

To clean the lint filter, open the dryer door and locate the filter at the bottom of the door opening. Pull it out, remove any lint, and rinse it under warm water. Ensure it is completely dry before reinserting it into the dryer.
If the dryer is not heating, check if the power supply is adequate and ensure that the settings are correct. Also, clean the lint filter and check the vent for blockages. If the issue persists, contact a professional technician.
The condenser unit should be cleaned every month. Remove it from the dryer, rinse it under a tap to remove lint and debris, and allow it to dry completely before reinserting.
Unusual noises may be due to loose items in the drum, an unbalanced load, or objects caught in the drum seal. Check and remove any foreign objects and ensure the dryer is placed on a level surface.
Yes, fabric softener sheets can be used in your Candy dryer. Place one sheet per load directly into the drum with the clothes.
To reset the dryer, unplug it from the power outlet for at least 5 minutes. Plug it back in and select the desired drying cycle.
The maximum load capacity for the Candy GVS C9DCRG-80 Dryer is 9 kg of dry laundry. Avoid overloading to ensure optimal performance.
To prevent creasing, promptly remove clothes from the dryer at the end of the cycle. Shake them out and fold or hang them immediately. You can also use the anti-crease function if available.
A dryer may stop mid-cycle due to overheating, which could be caused by a blocked vent or lint filter. Ensure the lint filter and vent are clean and not obstructed.
Regularly clean the lint filter, condenser unit, and the vent system. Check the drum for foreign objects, and ensure the dryer is level on the ground. Perform these checks monthly to maintain efficiency.