Candy GVS 168D3-80 User Manual

To start a wash cycle, load your laundry into the drum, add detergent to the dispenser, close the door, select the desired program using the program dial, and press the start button.
Check if the machine is properly plugged into an electrical outlet, ensure the power switch is on, and verify that the circuit breaker has not tripped. If the issue persists, contact a qualified technician.
To clean the filter, locate it at the bottom front of the machine, unscrew the cover, pull out the filter, remove any debris, rinse it under running water, and reinstall it securely.
Ensure that the washing machine is level on the ground, and that all transit bolts have been removed. Also, check if the load is balanced inside the drum.
Check if the drain hose is kinked or blocked, inspect and clean the pump filter, and make sure the drain hose is installed at the correct height.
Regularly clean the detergent drawer, check and clean the filter, inspect the hoses for any leaks or damages, and run a drum cleaning cycle monthly to prevent mold buildup.
Use cold water settings when possible, wash full loads instead of multiple smaller ones, and choose energy-efficient programs.
The error code E03 indicates a drainage issue. Check the drain hose and filter for blockages and ensure the pump is functioning correctly.
Yes, the machine has a dedicated wool program that gently washes woolen garments to prevent damage. Always check garment labels for care instructions.
The Candy GVS 168D3-80 has a maximum load capacity of 8 kg for cotton cycles. For synthetic and delicate cycles, refer to the manual for specific load recommendations.