Candy GVS 137DW3 1-S User Manual
![Candy GVS 137DW3 1-S manual cover](/images/sTomNyEIBaXmPfglJtzPkklG/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add the detergent, close the door securely, select the desired wash program using the rotary dial, and press the start button.
Ensure that the washing machine is plugged in and the power supply is working. Check if the door is closed properly and that you've selected a wash program. If the problem persists, consult the manual or contact customer service.
Regularly clean the detergent drawer, door seal, and drum to prevent mold and detergent buildup. Run an empty hot wash cycle with a washing machine cleaner or vinegar monthly.
Excessive vibration may be due to an unbalanced load. Try redistributing the laundry evenly. Also, ensure the washing machine is level and all four feet are firmly on the ground.
The error code E03 indicates a drainage issue. Check if the drain hose is kinked or blocked and ensure the filter is clean.
Yes, the machine has a dedicated program for delicate fabrics. Use the appropriate cycle and make sure to use a gentle detergent.
Use cold water wash cycles when possible, avoid overloading the machine, and run full loads to maximize efficiency.
Ensure the cycle has fully completed and wait a few minutes for the safety lock to release. If the lock doesn't release, unplug the machine for a few minutes and try again.
Leave the door open between washes to allow air circulation, clean the machine regularly, and avoid leaving wet laundry inside for extended periods.
Yes, you can pause a wash cycle by pressing the start/pause button. Once paused, the door may unlock after a few seconds, allowing you to add or remove items.