Candy GVFW4138LWHQR-IR User Manual
![Candy GVFW4138LWHQR-IR manual cover](/images/BiZjzdzmqQuENPxEfdrpBgJY/thumbs/thumb175x175.webp)
To clean the lint filter, open the door and locate the filter at the bottom. Pull it out gently, remove any lint by hand, and rinse it under warm water. Ensure it is completely dry before placing it back into the dryer.
If the dryer is not heating, check if the power supply is adequate and the settings are correct. Clean the lint filter and ensure the vent is not blocked. If the problem persists, contact a qualified technician.
Use the "Anti-Crease" or "Easy Iron" function to reduce wrinkles. Also, avoid overloading the dryer and remove clothes immediately after the cycle ends.
Error code E03 indicates a drainage issue. Check if the drainage hose is blocked or kinked. Clear any obstructions and ensure the hose is properly connected.
Yes, you can use fabric softener sheets. Place one sheet on top of the wet clothes before starting the drying cycle.
The condenser should be cleaned at least once a month to ensure optimal performance. Remove it from the dryer and rinse it under warm water to remove any lint or debris.
The Candy GVFW4138LWHQR-IR Dryer has a maximum load capacity of 8 kg for drying.
If the dryer is making a loud noise, check if it is level and stable. Remove any foreign objects from the drum. If the noise continues, it may require servicing by a technician.
Turn the dial to select the desired drying cycle. Refer to the user manual for specific cycle recommendations based on fabric type and dryness level.
Regularly clean the lint filter and condenser, check the vent for blockages, and ensure the drum is free from foreign objects. Perform a thorough inspection every few months and have it serviced annually.