Candy GVC D81B-80 User Manual
![Candy GVC D81B-80 manual cover](/images/ipmjmNmfeiakEZPgVfPfewnF/thumbs/thumb175x175.webp)
To start a drying cycle, first load your laundry into the drum. Close the door securely, select the desired drying program using the control knob, and press the start button. Ensure the dryer is connected to a power supply.
If the dryer is not heating, check if the appliance is properly plugged in and the circuit breaker is not tripped. Ensure the selected program involves heating. Clean the lint filter and check for clogs in the exhaust vent. If the problem persists, it may require service by a qualified technician.
To clean the lint filter, locate it inside the door frame or on the door itself. Pull it out, remove any accumulated lint by hand or with a soft brush, and reinsert it before starting the next drying cycle. Clean it after every use to maintain efficiency.
Regular maintenance includes cleaning the lint filter after every use, checking and cleaning the exhaust vent periodically, and wiping the drum with a damp cloth to remove any residue. Inspect the door seal for wear and replace if necessary.
If the dryer is not starting, ensure it is properly plugged in and the door is completely closed. Check the circuit breaker and confirm the start button is pressed firmly. If these steps do not resolve the issue, consult the user manual or contact customer support.
The Candy GVC D81B-80 dryer features energy-saving programs such as Eco Cotton and a Rapid program for smaller loads. Adjust these settings via the control panel to enhance energy efficiency and reduce drying time.
To reset the dryer, turn the program selector to the OFF position, wait a few seconds, and then select the desired program again. Press the start button to resume operation. This should clear any error codes caused by the power outage.
To reduce wrinkles, avoid overloading the dryer and use the appropriate drying cycle for the fabric type. Remove clothes promptly after the cycle ends and consider using the anti-crease or wrinkle guard feature if available.
If the dryer is taking longer than usual, check and clean the lint filter and exhaust vent for blockages. Ensure the selected drying program matches the load type and size. A professional inspection may be needed if these steps do not improve performance.
Ensure safety by regularly cleaning the lint filter, checking the exhaust vent for obstructions, and never leaving the dryer unattended during operation. Use the dryer on a flat and stable surface and follow the manufacturer's instructions for installation and use.