Candy GVC D1013B-80 User Manual
![Candy GVC D1013B-80 manual cover](/images/xEnJqnuKjgZaVZyHqzVSylqX/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the filter at the bottom of the drum. Pull it out and remove any lint by hand or with a soft brush. Rinse it under warm water if necessary, and ensure it's completely dry before reinserting.
If the dryer is not starting, check if it's plugged in and that the circuit breaker hasn't tripped. Ensure the door is fully closed and the start button is pressed firmly. Also, inspect the power cord for damage.
To prevent shrinking, use a lower heat setting and remove clothes while they are slightly damp. Refer to garment labels for specific drying instructions. Consider using the 'Delicate' cycle for sensitive items.
Regularly clean the lint filter and check the vent system for blockages. Every 6 months, inspect the drum and door seals for wear and clean the moisture sensor with a damp cloth.
Unusual noises can be caused by loose items in the drum or foreign objects in the lint filter. Check for loose buttons or coins and ensure the dryer is on a level surface. If noises persist, contact a technician.
To reset the dryer, unplug it from the power outlet, wait for a few minutes, and then plug it back in. This can help resolve minor electronic glitches.
Ensure the dryer is set to a heat cycle and check if the lint filter and exhaust vent are clear. Confirm that the power supply is adequate and, if necessary, consult a technician to inspect the heating element.
While it's possible to dry shoes, it's recommended to use a drying rack or hang them to avoid damage. If using the dryer, set it to a low heat cycle and check periodically.
Refer to the user manual to understand each cycle's purpose. For instance, use 'Cotton' for heavy fabrics and 'Synthetics' for lighter items. Adjust the cycle based on fabric type and desired dryness.
Use the 'Delicate' or 'Wool' cycle for gentle drying. Place delicate items in a mesh bag and avoid overloading the dryer to prevent damage.