Candy GS W485D-S User Manual
![Candy GS W485D-S manual cover](/images/AFSTdoNlpjhXVtXBsoUQuisP/thumbs/thumb175x175.webp)
To clean the lint filter, open the dryer door and locate the filter at the bottom of the opening. Pull it out gently, remove any lint by hand or with a soft brush, and then replace it securely before operating the dryer again.
First, ensure the dryer is plugged in and the circuit breaker is not tripped. Check if the selected program requires heat. If these are correct, inspect the heating element and thermostats for damage or call a professional technician for further diagnostic.
Use the 'Wrinkle Care' option if available, or remove clothes promptly at the end of the cycle. For best results, shake garments out before placing them in the dryer and do not overload the drum.
Ensure the lint filter is clean and the exhaust duct is not blocked. Additionally, check the load size and type to ensure it is suitable for the selected drying cycle. Heavy fabrics may require more time.
Yes, fabric softener sheets can be used in the Candy GS W485D-S Dryer. Place a single sheet on top of the wet clothes before starting the dryer for added softness and reduced static.
Regularly clean the lint filter and check the exhaust duct for obstructions. Periodically wipe the drum and exterior with a damp cloth. Inspect the door seal for wear and tear to ensure proper sealing.
Ensure the dryer is level and placed on a stable surface. Check that all four feet are in contact with the floor. Avoid overloading the dryer, and distribute clothes evenly inside the drum.
Use a shorter drying cycle or a specific setting for small loads if available. Also, ensure the lint filter is clean, and avoid over-drying by selecting an appropriate dryness level.
Check if any items like coins or buttons are caught in the drum. Ensure the dryer is level and not overloaded. If the noise persists, it might indicate a problem with the drum rollers or belt, requiring professional inspection.
Refer to the user manual for program guides. Generally, lighter fabrics like cotton can use a regular cycle, while delicate or synthetic fabrics should use a gentle or low-heat cycle to prevent damage.