Candy GOV 570C-S User Manual

To clean the lint filter, open the dryer door and locate the filter at the bottom of the door opening. Remove the filter by pulling it upwards. Clean the filter by hand or with a soft brush to remove lint and debris, then replace it securely before using the dryer.
First, ensure that the dryer is plugged in and the circuit breaker is not tripped. Check the settings to ensure they are correct. If these are fine, inspect the heating element and thermostats for continuity using a multimeter. If defective, they may need replacement.
If drying takes longer, check the lint filter and exhaust vent for blockages. Ensure the dryer is not overloaded and that the clothes are sorted by fabric type. Regular maintenance of the venting system boosts efficiency.
To reduce noise, ensure the dryer is level and placed on a stable surface. Check for any loose items or objects inside the drum. Tighten any loose screws on the cabinet or drum.
Regularly clean the lint filter after each use. Inspect and clean the exhaust vent periodically to prevent blockages. Check the drum belt and drive motor for wear every six months.
To reset the dryer, unplug it from the power outlet and wait for a minute before plugging it back in. This can clear minor electronic glitches. If the fault persists, consult the user manual or a professional technician.
While the Candy GOV 570C-S Dryer is versatile, always check fabric care labels before drying. Delicate fabrics may require air drying or a low heat setting. Avoid drying items with foam rubber or similar materials.
Possible causes include power interruptions, a tripped circuit breaker, or an overheated motor. Ensure the dryer is receiving power and inspect for overheating issues. If problems persist, seek professional assistance.
To prevent wrinkles, promptly remove clothes at the end of the cycle. Use the appropriate drying settings for different fabric types and avoid overloading the dryer. Consider using a wrinkle-release cycle if available.
Check if the bulb needs replacement by removing the dryer top and accessing the light fixture. Replace with a new bulb of the same type. If the new bulb doesn't work, there may be an electrical issue requiring professional repair.