Candy GO W465-01S User Manual
![Candy GO W465-01S manual cover](/images/QnMkvwHodeIoiFenyCowusIF/thumbs/thumb175x175.webp)
To start a drying cycle, load your clothes into the drum and close the door securely. Select the desired drying program using the program dial, and then press the start button. Ensure that the water reservoir is empty and the lint filter is clean before starting.
If your dryer is not heating, first check if the power supply is connected and if the circuit breaker is not tripped. Ensure the selected program is appropriate for heating. Clean the lint filter and check for any blockages in the vent. If the issue persists, the heating element might need servicing.
To clean the lint filter, open the door and locate the filter at the bottom of the door opening. Pull it out, remove any lint by hand or with a soft brush, and then place it back securely. Clean the filter after every drying cycle to maintain efficiency.
Perform regular maintenance by cleaning the lint filter after each use, emptying the water reservoir, and wiping the drum with a damp cloth. Monthly, check and clean the exhaust vent to prevent lint buildup. Annually, have a professional inspect the appliance for optimal performance.
Unusual noises may be due to unbalanced loads, foreign objects in the drum, or worn drum rollers. Check for loose items inside the drum, ensure the dryer is level, and redistribute the load. If noises persist, it may require professional examination.
To reset the dryer, turn the program dial to the "OFF" position, wait a few seconds, and then select the desired program again. Press the start button to initiate the cycle. Consult the user manual for specific fault codes and solutions.
If the dryer is taking too long, ensure that the lint filter is clean and the exhaust vent is clear of obstructions. Avoid overloading the dryer, and select an appropriate drying program. Check that the room temperature is not excessively low, as this can affect drying efficiency.
While the dryer can handle most fabrics, always check garment care labels before drying. Delicate fabrics may require a lower heat setting or be unsuitable for machine drying. Use the appropriate program settings for different fabric types to avoid damage.
Locate the water reservoir at the bottom front of the dryer. Gently pull it out, carefully empty the collected water, and then slide it back into place. Empty the reservoir after each drying cycle to prevent overflow.
The Candy GO W465-01S Dryer is designed to be energy efficient, but the specific energy efficiency rating can vary by model and region. Check the user manual or the energy label on the appliance for precise information.