Candy GO F462S-80 User Manual
![Candy GO F462S-80 manual cover](/images/aaQUcMFHnKrhNTfRZsTZZavu/thumbs/thumb175x175.webp)
To clean the detergent drawer, remove it from the washing machine, rinse under warm water, and scrub gently with a soft brush to remove any buildup. Ensure it is completely dry before reinserting.
First, check if the drain hose is kinked or blocked. Next, clean the pump filter located at the bottom of the machine by unscrewing it and removing any debris.
To reset the machine, unplug it from the power source, wait for about 1-2 minutes, and then plug it back in. This can help resolve minor software glitches.
The maximum load capacity for the Candy GO F462S-80 is 6 kg. Ensure not to overload the machine to maintain optimal performance.
Ensure the washing machine is level on the floor and that the transit bolts have been removed. Also, check that the load is balanced inside the drum.
Regularly clean the detergent drawer, door seal, and drum. Check and clean the filter every month to maintain efficient operation.
If the door won't open, wait for the machine to cool down as it might be due to a safety lock. If it persists, check for water in the drum and ensure the cycle is fully completed.
To prevent mold and mildew, leave the door slightly open after each wash to allow air circulation and use a washing machine cleaner once a month.
Select your desired wash cycle and then press the delay start button. Set the delay time by using the timer buttons, and press start to activate the delay.
Refer to the user manual for error code explanations. Common codes like E03 indicate drainage issues, which can often be resolved by checking the filter and hoses.