Candy GO DV36 1-37S User Manual

To clean the lint filter, first ensure the dryer is off. Open the door and remove the lint filter from its slot. Use your fingers or a soft brush to remove any lint buildup. Rinse under warm water if needed and allow it to dry completely before reinserting.
Check if the dryer is properly plugged in and that the circuit breaker is not tripped. Ensure the selected drying program includes heat. Clean the lint filter and check for any clogs in the venting system. If these steps don’t resolve the issue, consult a professional technician.
Verify that the dryer is connected to power. Check if the door is securely closed, as the dryer will not operate if the door is open. Inspect the drive belt for any signs of wear or breakage and replace if necessary.
Perform a basic maintenance check every 3-6 months. This includes cleaning the lint filter, inspecting the vent hose, and checking for any unusual noises or vibrations. A professional service check is recommended annually.
This could be due to a clogged lint filter or venting system, which restricts airflow. Clean the lint filter and ensure the vent hose is free of obstructions. Also, check that the load size is not too large for the chosen drying program.
It is generally not recommended to put sneakers in the dryer, as the heat can damage them and cause noise. Instead, use a drying rack or allow them to air dry. If necessary, use a low heat setting and place them in a mesh bag.
Check for any loose items such as coins or buttons inside the drum. Inspect the drum seals and support rollers for wear and tear. Tighten any loose screws or bolts. If the noise persists, contact a professional technician.
It is generally not recommended to leave the dryer running unattended due to the risk of fire. Always ensure that the dryer is turned off when you leave the house or go to bed.
To minimize wrinkles, remove clothes promptly after the drying cycle ends. Use a lower heat setting and consider using a fabric softener sheet. You can also shake out garments before placing them in the dryer.
The Candy GO DV36 1-37S Dryer requires a standard 220-240V power supply. Ensure the electrical outlet and plug are in good condition and that the circuit can handle the appliance’s power requirements.