Candy GCV 580NC-S User Manual
![Candy GCV 580NC-S manual cover](/images/QgoFAeGbQsODPaAfUmyalrDV/thumbs/thumb175x175.webp)
To start a drying cycle, load your laundry into the drum, close the door, select the desired drying program using the program selector, and press the start button. Ensure the power is connected and the water tank is empty.
If the dryer is not heating, check if the lint filter and condenser are clean, ensure the power supply is stable, and verify that the selected program includes a heat setting. If the problem persists, consult the user manual or contact customer service.
The lint filter should be cleaned after every drying cycle to maintain optimal drying performance and prevent overheating.
To prevent wrinkles, promptly remove clothes from the dryer at the end of the cycle. You can also use the anti-crease function if available. Avoid overloading the drum for better results.
Ensure the door is fully closed, the power cord is plugged in, and the start button is pressed firmly. Check the circuit breaker and make sure the selected program is suitable for the load.
Regularly clean the lint filter and condenser, check the water tank, and inspect the door gasket for debris. Perform a full maintenance check every few months to ensure efficient operation.
To reduce drying time, ensure the load is not too large, select an appropriate drying program, and clean the lint filter and condenser regularly to improve airflow.
Check for any foreign objects in the drum or filter area, ensure the dryer is level, and inspect the drum for damage. If the noise persists, contact a service technician.
Most fabrics can be dried in the dryer, but always check the care labels. Delicate items should be dried on a low heat setting, and avoid drying items that are not suitable for tumble drying.
To reset the dryer, turn it off, unplug it from the power source for a few minutes, then plug it back in and restart. If the issue continues, refer to the troubleshooting section of the user manual.