Candy GCSW 485T 1-80 User Manual
![Candy GCSW 485T 1-80 manual cover](/images/INkJpVnKOhVJyTRmuOVVDhTM/thumbs/thumb175x175.webp)
To reset the dryer, unplug it from the power source, wait about 5 minutes, and then plug it back in. This can help resolve minor issues and reset the control board.
Check if the dryer is set to a no-heat setting. Ensure the lint filter is clean, as a clogged filter can affect heating. If the problem persists, it may require a service technician to inspect the heating element or thermostat.
The lint filter should be cleaned after every drying cycle to ensure optimal performance and prevent fire hazards.
Ensure the lint filter and the vent hose are not blocked. Overloading the dryer can also cause it to take longer. Make sure the dryer is not set to a low heat or air fluff setting.
Use the 'anti-crease' or 'wrinkle guard' feature if available. Remove clothes promptly at the end of the cycle and fold or hang them immediately.
Regularly clean the lint filter and vacuum the exhaust hose to prevent lint buildup. Check the drum seals and door for damage and clean the exterior and control panel with a damp cloth.
Check for any loose items like coins or buttons in the drum. Inspect the drum rollers and belt for wear and tear. Tighten any loose screws and ensure the dryer is level.
It's not recommended to dry sneakers in the dryer as it can damage both the shoes and the appliance. Air drying is a safer option.
Signs include clothes taking longer to dry, the dryer becoming hotter than usual, or a burning smell. Regularly inspect and clean the vent to prevent clogging.
Make sure to dry full loads without overloading, clean the lint filter after each use, and use lower heat settings when possible. Consider using the dryer during off-peak energy hours.