Candy GC 1662D1S 1-80 User Manual
![Candy GC 1662D1S 1-80 manual cover](/images/aHzmETbFkYuuBPqRoXkEVKzd/thumbs/thumb175x175.webp)
To start a wash cycle, load your clothes into the drum, add detergent, select the desired wash program using the program dial, and press the start button. Ensure the door is properly closed before starting.
Check if the drain hose is kinked or blocked. Also, inspect the pump filter for any debris and clean it if necessary. If the problem persists, contact a professional technician.
Remove the detergent drawer by pulling it out gently and pressing down on the release mechanism. Rinse it under warm water and use a brush to remove any buildup. Dry it thoroughly before reinserting.
Error code E03 indicates a drainage issue. Check the drain hose and pump filter for blockages. Ensure the drain pump is functioning correctly.
It is recommended to clean the pump filter every month to prevent blockages and ensure optimal washing machine performance.
Run an empty hot wash cycle with a drum cleaning detergent or a mixture of vinegar and baking soda to clean the drum. This should be done every few months.
Ensure the washing machine is level by adjusting its feet. Check that the load is balanced and not overloaded. Also, ensure the transit bolts have been removed if the machine is newly installed.
Yes, use the delicate or hand wash program for fragile items. Make sure to use a gentle detergent and place items in a mesh laundry bag for added protection.
Check that the water supply is turned on and the inlet hose is not kinked. Also, inspect the inlet filters for blockages and clean them if necessary.
To reset the machine, turn it off and unplug it from the power supply for a few minutes. Plug it back in and turn it on. This should reset the electronic controls.