Candy EVOGT 10072D3-UK User Manual
![Candy EVOGT 10072D3-UK manual cover](/images/tZGwIgRsJwbwiTAsCNzfgfvE/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add the appropriate amount of detergent. Close the door securely, select the desired wash program using the control dial, and press the start button.
If your machine is not draining, check the drainage hose for any kinks or blockages. Ensure the filter is clean and not clogged. If the problem persists, a technician may need to inspect the pump.
To clean the detergent drawer, remove it from the machine by pulling it out and pressing the release lever. Rinse it under warm water to remove any detergent residue and dry thoroughly before reinserting.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the filter, inspecting the door seal for mold, and running a hot wash cycle with no laundry to clean the drum.
Ensure the machine is level and stable. Check for any loose items in the drum. Inspect the drum bearings and suspension for wear. Excessive noise may require professional inspection if these steps do not resolve the issue.
Yes, the Candy EVOGT 10072D3-UK has a dedicated program for delicate fabrics. Select the 'Delicates' program and use a gentle detergent to protect your fabrics.
If the door doesn’t open, ensure the cycle has completed and the machine has cooled down. Check if the child lock is activated. If the door remains locked, unplug the machine for a few minutes and try again.
To adjust the spin speed, select your desired program and use the spin speed button to increase or decrease the speed as needed. Refer to the user manual for specific spin speed options available for each program.
To reset the washing machine, turn it off and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can help reset any minor electronic issues.
Excessive vibration can be caused by an unbalanced load. Ensure that the laundry is evenly distributed in the drum. Check that the machine is level and that the transit bolts have been removed if it's newly installed.