Candy EVO4 1274LW3-S User Manual
![Candy EVO4 1274LW3-S manual cover](/images/wGOMWzSNemOlaOkbnGzhFFod/thumbs/thumb175x175.webp)
To reset the Candy EVO4 1274LW3-S washing machine, turn off the power by unplugging it or switching off the circuit breaker. Wait for about 2-3 minutes, then plug it back in or switch the power back on. This soft reset should clear any temporary errors.
Check if the drain hose is kinked or blocked. Ensure that the filter is clean and not clogged. If the problem persists, inspect the pump for any blockages or call a professional technician for assistance.
Remove the detergent drawer by pulling it out gently. Wash it under warm water using a soft brush to remove any detergent residue. Ensure it is completely dry before reinserting it into the machine.
Excessive vibration may be due to an unbalanced load. Ensure the laundry is evenly distributed in the drum. Also, check that the machine is level by adjusting its feet.
Regularly clean the detergent drawer, door seal, and drum. Run a maintenance wash using hot water and a cup of white vinegar monthly to prevent limescale and detergent buildup.
Ensure the power cord is plugged in and the circuit breaker is not tripped. Check that the door is closed properly and the start button is pressed. If the issue persists, the door lock or control board may need attention.
Yes, the Candy EVO4 1274LW3-S has a specific wool cycle that is gentle on woolen garments. Always check the garment's care label and use a wool-safe detergent.
Inspect the door seal for any damage or debris and ensure it is clean. Check the hoses for any cracks or loose connections. Tighten any loose fittings and replace damaged parts as necessary.
Select the desired wash program and then press the delay start button. Use the control panel to set the desired delay time. The machine will start the wash cycle after the set delay period.
Error code E03 typically indicates a drainage issue. Check the drain hose and filter for blockages, and ensure that the pump is functioning correctly. If the error persists, consult a technician.